The eGo ONE is charged through a Micro USB Port via a computer or a wall adapter with the USB cable.
ON/OFF battery switch:
Press the power button five times in rapid succession to turn on the eGo ONE. Once the eGo ONE is on, hold down the power button to activate the atomizer and vape. When the eGo ONE is not in use, press the power button five times in succession to power off the device.
The eGo ONE has a built-in mAh polymer Li-Ion rechargeable battery available in 1100 mAh or 2200 mAh.
15 second cutoff:
If the activation button is held for 15 seconds or longer the device will stop firing until the button is released and pressed again.
Low voltage warning:
The indicator light will continue blinking when the battery capacity is lower than 3.3V and the device will power off automatically.
Short circuit protection:
Short circuit protection protects the device against shorted atomizers and will stop the unit from functioning in unsafe conditions.
Battery display function:
The light indicator will flash slowly or stay lit when battery level is high, and the light will flash with frequency if low.
Sõltub mudelistLisa ostukorvi